Kamwei Fong
Art Director, Designer — Kuala Lumpur, Malaysia
Eggie Bo – DIY a Bo with recycled materials, have fun with your kids!
Full Size (highres_width x highres_height)
There are a few things needed:
1. a piece of scrap paper.
2. an egg shell, break the tip, remove the egg carefully, and dry it.
3. double-sided tape.
4. permanent marker.
5. a pair of scissors.
1. a piece of scrap paper.
2. an egg shell, break the tip, remove the egg carefully, and dry it.
3. double-sided tape.
4. permanent marker.
5. a pair of scissors.
Full Size (highres_width x highres_height)
Firstly, draw the egg shell with permanent marker, any patterns you like. If you prefer to have some colours, you can consider to use other medium, e.g permanent colour pen, acrylic paint, etc.
Full Size (highres_width x highres_height)
Secondly, draw the fish tail and fins.
Full Size (highres_width x highres_height)
Cut them out.
Full Size (highres_width x highres_height)
Stick the tail first with double-sided tape, and then fix the fins very carefully, don't press too hard on the shell.
Full Size (highres_width x highres_height)
Put a tape at the bottom of Bo, to make sure he can sit nicely on ground.
Full Size (highres_width x highres_height)
Tadaaaa~ finished! This is an Eggie Bo! Happy or not?
Full Size (highres_width x highres_height)
You can try as many patterns as you wish, with colours or other ornaments.
Full Size (highres_width x highres_height)
A school of Eggie Bo is swimming happily now :)
Full Size (highres_width x highres_height)
The more the merrier.
Full Size (highres_width x highres_height)
Try it at home and share the joy!
Favorited by 16 people
Previous
Previous
