Raheel Mughal
Product Design Student — Bradford, United Kingdom
This term-long project focussed on the 3d modelling, design optimisation and resolved solution of an existing pushchair. The key focus was on the detail of the design, not on the aesthetic. Various tests using the CosmosWorks sofware add in for SolidWorks were implemented to test the frames Factor of Safety and overall Displacement. A careful selection of materials with a short justification for the Pushchair design was required, in order to improve the performance as well as to lower the costing for the manufacturing of the product.
Full Size (highres_width x highres_height)
Final Presentation Board - Final A2 Presentation Board.
The redesign of Phil & Ted's Smart Stroller.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks (Canopy made in Alias) and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project - Final Render. Modelled in SolidWorks and rendered in Photoview 360.
Full Size (highres_width x highres_height)
3D Pushchair Modelling Project
Full Size (highres_width x highres_height)
Factor of Safety Test - Using CosmosWorks Simulation, applying relevant fixures and loads.
Full Size (highres_width x highres_height)
Displacement Test - Using CosmosWorks Simulation, applying relevant fixures and loads.
Having modelled the pushchair in SolidWorks from scratch it was then saved as an STL, so that it could be imported into 3ds Max.
A Daylight system was applied to the animation scene, Mental Ray materials were applied to all the pushchair components, and then rendered.
The animation was edited and enhanced using Adobe Premiere Pro CS5.
Animation soundtrack: PNAU - Baby (Breakbot Remix)
DISCLAIMER:
The product featured in the presentation is on behalf of the Phil and Teds Most Excellent Buggy Company Ltd ("phil&teds") and therefore, copyrights & trademarks solely belong to them.
Please Note:
This is my first ever animation I have done. I know that there are things that can be improved, the next project that will work on will for sure, be of a higher standard.
Favorited by 16 people
Previous
Previous
