The following project resulted from my work as the kitchen designer at Home Depot. I remodeled the space and worked with the client to redesign structural elements that would increase the overall size of the room and that maximized the preparatory area. In order to open up the space, a new traffic pattern was also established.
The following photos are results from the finished project. Please enjoy!
Residential Kitchen After Photo A
Technical Skills Employed:
*Space Planning
*Rendering
* Research
Software Used:
*20/20
Residential Kitchen After Photo B
Residential Kitchen After Photo C
Residential Kitchen After Photo D
Residential Kitchen After Photo E
Residential Kitchen After Photo F
Residential Kitchen After Photo G
Residential Kitchen After Photo H
Tampa Dermatology and Allergy
I designed the following project, The Tampa Dermatology and Allergy Center, while a student at IADT, Tampa, Florida. The project design needed to follow several requirements:
* the fulfillment of all healthcare codes for the state of Florida
*accommodations for two doctors and their patients
*a design that reflects health, healing and tranquility
Throughout the development of the project, I made certain to always considered form and function. The following images are also taken from the Tampa Dermatology and Allergy Center project. Please enjoy!
Tampa Dermatology Reception/Lobby
Tampa Dermatology and Allergy Floor Plan
Was used as presentation materials to be marketed to the consumer. As this was used during a school project, the grade that I received was an A. My teachers also awarded me with good marks for layout and color selection.
Technical Skills Employed:
*Space Planning
*Rendering
*Technical Research
Software Used:
*3ds Max
*Photoshop
*Revit
Tampa Dermatology and Allergy RCP
This was used to show the different types of lighting that are in the space. It also shows the difference in the ceiling heights and how that aspect of the design effects the lighting.
Types Of Lighting In The Space:
*Can Lights
*Pendent Lights
*2X4 Indirect/Direct Lighting
Tampa Dermatology Nurses Station
The Tampa Dermatology Patient Room
Tampa Dermatology Triage
I designed the following project, Brazilian Cuisine Restaurant, while a student at IADT, Tampa, Florida. The project design needed to meet several requirements:
* restricted to an existing building shell
* the fulfillment of all building codes for the state of Florida
* dining seating for 130
* atmosphere that embodies the country of Brazil and an upscale environment
The design is meant to be simple. It balances seating capacity with customers' comfort and relaxation. The following images are taken from the Brazilian Cuisine Restaurant project. Please enjoy!
Brazilian Cuisine Bar View
Brazilian Cuisine Floor Plan
The Brazilian Cuisine floor plan was used to show how the restaurant would flow as a whole. This was done as a school project. I got an A on this project and I was given high marks on the aspects of floor plan planning and the 3d bar I custom designed by specifying the demolitions and colors in revit.
Technical Skills Employed:
*Space Planning
*3D Modeling
*Technical Research
Software Used:
*Photoshop
*Revit
Brazilian Cuisine RCP
Types Of Lighting Used
*Pendent lights
*Recessed Cans
*Under Cabinet
*Wall Sconce
*Can Lights
Brazilian Cuisine Dinning Room
Brazilian Cuisine Section
Brazilian Cuisine Materials Board
gLike
Space Planning
