• Stream
  • Portfolio
  • About
Tester Test heads - This machine can be seen via the following link: http://www.youtube.com/watch?v=eyCeZiDVQk0
Hydrostatic Tester - The main purpose of this machine was to hydrostatically test 0.5" to 4" pipes at pressures up to 3000 psi.

My key responsibilities consisted of the design of 19 separate test plugs (not shown), six test heads on either side of the machine, and the drain tables to the left. I was also in charge of all the pneumatic and hydraulic systems design for the whole machine.

This machine can be seen via the following link: http://www.youtube.com/watch?v=eyCeZiDVQk0
Press Station (SolidWorks) - Air/Oil bushing press station.
Press and Weld Station (Built) - Air/Oil bushing press station built and the laser guarding I designed for a Class IV Trumpf laser.
Press Station Tooling (SolidWorks) - Close up of press tooling fixtures. Tooling plates were made to be able to swap out for 2 separate products.
Press Station Tooling (Built) - Close up of press tooling fixtures built.
Automotive Product Tooling Fixture (Solidworks) - Second tooling plate product fixture.
Material Handling Station (SolidWorks) - Material handling station for medical industry.
Leak Tester Cell (SolidWorks) - Leak Tester for oil cooler automotive product.
Robotic End Effector (SolidWorks) - Material handling end effector for medical industry.
Magnetic Marker (SolidWorks)
Magnetic reader (SolidWorks)
Tube Press Station (SolidWorks)
Tube Press Station 2 (SolidWorks)
Tube Press Station 2 (Built)
Dual Vacuum Chamber Press Tool (SolidWorks)
Dual Vacuum Chamber Press Tool Close up (SolidWorks)
Exploded Tooling Drawing
Manual Leak Tester Fixtures (SolidWorks)
Automotive Product Welding Fixture (SolidWorks)
Automotive Product Welding Fixture II (SolidWorks)
Automotive Product Welding Fixture (Built)
Upper Tooling (Built)
Upper Tooling (SolidWorks)
Automotive Product Welding Fixture III (SolidWorks)
Exploded Weld Fixture (SolidWorks)
Cam Following Fixture EGR (SolidWorks)
Cam Following Fixture EGR 2 (SolidWorks)
Cam Following Fixture EGR 3 (SolidWorks)
Cam Profile Rod (SolidWorks)
Cam Following Fixture EGR II (SolidWorks)
Cam Following Fixture EGR II 2 (SolidWorks)
Cam Following Fixture EGR II 3 (SolidWorks)
Cam Following Fixture EGR II 4 (SolidWorks)
Part Detection Tooling Plate (SolidWorks)
Part Detection Tooling Plate (1/2Built)
Part Detection Tooling Plate (Built)
Part Detection Tooling Plate II (SolidWorks)
New Hydrotester - Hydrotester for testing pipes ranging from 2" to 6" in diameter and 21 feet to 42 feet long.
Designs
JonPaul Laskis
Mechanical Machine Designer Simpsonville, SC